Asphalt Repair
Asphalt repair and patching for driveways and small lots around Lebanon. We cut out potholes and failed spots, then fill them with hot mix asphalt.
Learn More
Paveway Paving Pros does asphalt resurfacing for worn driveways and small parking lots around Lebanon, Tennessee. An overlay puts a fresh layer of hot mix asphalt on top of the old surface. It works when the base underneath is still sound. When the base has failed, the driveway needs a full replacement instead.
We look at the driveway or lot first, then put a free estimate in writing. Broken spots get repaired before our own pavers and rollers lay the new hot mix. Resurfacing is part of our work as a paving company in Lebanon, Tennessee. Call or text (615) 894-5175 to set up a visit.
Tell us about the driveway, farm lane or parking lot and where it is. We look at the job and put a free estimate in writing.
Asphalt driveway resurfacing works when the wear is on top and the base below is still firm. The top may be rough, with loose stone or small cracks in places. A few broken spots can be cut out and patched before the overlay goes down. An asphalt industry guide says an overlay can improve a driveway's condition and strengthen it.
Base trouble is a different story. Alligator cracking looks like a web of small, connected cracks. A pavement engineering reference traces it to weak support below and lists poor drainage as one cause. Low spots that hold water after rain can mean the ground under them has settled.
The same reference says a layer with that cracking adds little or no strength. When the base has failed across the whole drive, the driveway needs a full asphalt driveway replacement. We look at the driveway first and tell you which fix it needs.
Every asphalt overlay starts with repairs. An asphalt industry guide says to cut out and patch broken spots and large cracks first. We do that patch work the same way we handle asphalt repair and patching jobs.
The old surface needs to be clean and dry before new asphalt goes on. The same guide calls for a liquid asphalt tack coat on an older layer. Federal Highway Administration guidance calls tack coat the glue between layers. It links poor bonding between layers to cracking and potholes.
Then the new hot mix goes down, laid with our own pavers and pressed smooth with our rollers. The asphalt industry guide calls for paving and rolling as one continuous step, while the asphalt is hot. It also calls for a smooth finish that will not hold puddles.
Census estimates put the median build year for Lebanon homes at 2004. A driveway laid with a house that age has seen more than 20 Tennessee summers and winters. If its base still holds firm, driveway resurfacing can give it a new top. National cost guides say resurfacing uses less material and labor than a full replacement.
An overlay raises the surface a little, since it sits on top of the old asphalt. That matters most where the drive meets the garage floor and the road. We look at those edges at the estimate and talk through how the new layer will meet them.
We are based in Lebanon and resurface driveways and small lots about 60 miles around it. That area takes in Nashville, Murfreesboro, Franklin and Cookeville, across Middle Tennessee.
Call or text for a written quote. We work about 60 miles around Lebanon across Middle Tennessee.
(615) 894-5175From the first call or text to the finished work, here is how it goes.
Call or text (615) 894-5175, or send the form. Tell us what needs paving or sealing and where the job is.
We look at the job and check the ground under it. We also see where the rain runs off.
The free estimate comes to you in writing. Once you say yes, we set a day for the work.
New paving starts with string lines and grading. Then a roller packs the stone base. On older asphalt, we repair the broken spots first.
Hot mix goes down from the top of the drive out to the road, and the rollers press it smooth. Once new asphalt cures, we normally seal it.
Common questions about resurfacing around Lebanon and the rest of Middle Tennessee. If yours is not here, call or text and ask.
Asphalt repair and patching for driveways and small lots around Lebanon. We cut out potholes and failed spots, then fill them with hot mix asphalt.
Learn More
Tar and chip is liquid asphalt with stone chips rolled into it, laid over a packed stone base. It costs less up front than hot mix, and we quote both so you can compare.
Learn More
We stripe the lots we pave or seal, and we re-stripe faded lots too. Stalls and accessible spaces get marked so drivers know where to park.
Learn MoreFederal soil maps show clay over limestone under much of Lebanon, and water moves slowly through that clay. We grade for drainage and pack a crushed stone base before any hot mix goes down.
Asphalt has pores, and water gets into the pavement through them. We brush or squeegee the sealer into the surface so it fills those pores.
We look at the job before we put a price on it. Then you get a free estimate in writing.
Lebanon sits east of Nashville on I-40, at the center of our service area. Our work reaches the Nashville area, Murfreesboro, Franklin and east to Cookeville.
Tell us what you need paved or sealed and the town the job is in. Call or text (615) 894-5175 or use the form, and we will set a time to look at it.
Tell us about the driveway, farm lane or parking lot and where it is. We look at the job and put a free estimate in writing.
